Traditional Tuck Pointing | Avarisk | Home Design | Interior, Exterior, Decoration, Remodel for Home

Traditional Tuck Pointing

Traditional Tuck Pointing

January 15, 2016

When we talk about the tuck pointing, then we will talk about the process of repairing and replacing the mortar between the bricks and stone walls were damaged - cracked, crumbling, potholes, and other problems that are often found along with the age of the wall. In addition to experiencing the ravages of time, we also often have the same problem although still fairly young age of the wall caused by several things, including poor installation, extreme weather that often occurs, and others. The existence of holes and other damage is a sign that the repair should be done immediately. We must also make improvements when mortar develop a gap that if left unchecked can make a lot of things we do not want, including water enter into the tissue and widen the existing hole. To generate the correct installation of tuck pointing, then the right mortar mix is the key to the success of the work. In addition, we also must pay attention to the type and condition of the brick wall is damaged. Remember, that not all created equal mortar mix so that we can choose and get the mortar in accordance with the specifications that we want - whether based on performance, based on the cost of, or based on appearance. We also must remember that even though we have been using appropriate materials and has a surefire technique to produce water tight job, but it would be fitting if we leave it to experienced professionals. Professionals will use a mixture of mortar and the right tools to deliver improvements in accordance with the conditions that occurred on the brick wall. Applying tuck pointing or repair the mortar is not an easy matter to do when we do not know the best way to do the handling. For older buildings, for example, we cannot apply modern mortar onto it because it can cause serious damage to the original building materials and certainly will not survive long. It is therefore important for us to get the mortar in accordance with the porosity and compressive strength of the building. Then, how to tuck pointing cost? Well, there are several things that affect the size of the repair cost will we spend including quantity, joint conditions, and accessibility. The process will make us spend about $ 7 to $ 10 per square foot with a record under normal conditions. Anyway, be sure to make improvements at any time. We can choose to do so in late spring and early autumn. This we do in order to avoid freezing and thawing the initial cycle can be bad for the new mortar.


Encourage, Get, Pointing, Time, Right, Tuck,